BMW 3-Series Wheel Spacers

BMW 3-Series Wheel Spacers

BMW 3-Series Wheel Spacers

There are 6 generations of BMW 3-Series, however the most common are the E30, E36 and E46. There are 2 different PCD sizes between these models. The E30 (1984-1992) uses a 4x100 PCD whilst the E36 (1990-2000) and E46 (1998-2006) use a 5x120 PCD. The older E30 PCD is commonly used in older model VW and Honda whilst the newer E36 and E46 PCD is also shared by Land Rover. Below is a guide to show you what wheel spacer you will need for each BMW 3-Series. Please note the E30 M3 uses the later 5x120 PCD.

Bolt on and slip on wheel spacers.

Slip on wheel spacers offer thickness between 5mm and 25mm, 15mm and above have an outer centre bore lip of the same size as the hub. The bolt on wheel spacers offer spacing between 20mm and 60mm. For more information on our wheel spacers, please see our Wheel Spacers Explained page.

BMW 3-Series E30 (1984-1992)

Wheel Spacers Details

  • PCD : 4x100
  • CENTREBORE : 57.1
  • THREAD TYPE : M12x1.5
  • NUT OR BOLT : bolt

BMW 3-Series E36 (1990-2000)

Wheel Spacers Details

  • PCD : 5x120
  • CENTREBORE : 72.6
  • THREAD TYPE : M12x1.5
  • NUT OR BOLT : bolt

BMW 3-Series E46 (1998-2006)

Wheel Spacers Details

  • PCD : 5x120
  • CENTREBORE : 72.6
  • THREAD TYPE : M12x1.5
  • NUT OR BOLT : bolt

This information is for UK/European vehicles, other countries may differ. This guide is a general example and some models may require different size wheel spacers, if you are unsure, please use our vehicle selector on our Wheel Spacers page.

Processing...